Buy

Our UDA 55 digital display sets new standards in readability and variety.
The TFT color display offers you completely new possibilities—one device for every application.
Our free software allows you to conveniently choose between 18 preprogrammed units. In addition, the colors of the measured value and the unit can be changed independently of each other.
Want to display two different measured values side by side? How about a red display for temperature and a blue one for fill level, for example? All this is possible with the UDA 55.

Weld-in socket GEM 150 for our sensors with 1/2” standard thread.

Compression fittings KVS, suitable for our sensors with a 6 mm diameter.

Our KMU 100 head transducer can be used as a cost-effective option for converting your passive sensor. Its dimensions allow it to fit into all standard Form B connection heads. 
For example, the KMU 100 can also be installed as a replacement part in existing active sensors.

Our MUFG-DMU transducer in a field housing is a cost-effective option for displaying the process temperature directly in the field or on a stand-alone system and transmitting it to an evaluation or control unit via a 4-20 mA signal.
In combination with one of our cable sensors, you have the perfect symbiosis of measured value acquisition and display, including measured value conversion.

NST 260 level probe as a ground sensor
The NST 260 level probe is used for leak monitoring, e.g., in basements or server rooms.

The Historical Vierver can be used to read and change the device configuration of the PPR 500. The stored measured values 
of the data logger can also be read, displayed, and edited using the Windows application. Data is transferred between the 
application and the data logger via an Ethernet interface or a removable storage device (USB stick or SD card). 
Alternatively, the configuration of the PPR 500 can also be changed via the touchscreen.

Compatible products: PPR 500
Required: PC with USB interface or SD card slot or Ethernet interface, USB stick or SD card or Ethernet cable

The pmtKinfigTool is a Windows application for parameterizing and configuring multiple promesstec devices. 
These mainly include transducers, displays, and sensors. 
To establish a connection between a PC and a promesstec device, only a USB-C cable is usually required 
(no additional adapter or interface converter). 
In addition to parameterization, measured values can also be read out in real time.

The UMU 500 from promestec has buttons as well as a micro USB interface. This allows the universal measuring transducer to be parameterized using 
the PM tool. The current device configuration can also be read out and saved on the PC.

Compatible products: UMU 500
Required: PC with USB interface, micro USB cable

The universal PID controllers from promesstec can be parameterized both via push buttons and via the associated 
Windows application UREG Config. The current device configuration can also be read out and saved on the PC. 
A special interface adapter is required to connect the PC and the controller.

The touch panels from promesstec GmbH are configured using the Panel Studio software. The program can be used not only to 
create and edit visualizations, but also to configure the interfaces. The Historical Vierwer is used to read out logged data. 
Data is transferred between the PC and a touch panel via an Ethernet interface or 
a removable storage device (USB stick or SD card).

Compatible products: TSP 450, TSP 750, TSP 1060, TSP 1550
Required: PC with USB interface or SD card slot or Ethernet interface, USB stick or SD card or Ethernet cable

THVA-KVS-G1/2" immersion tube with clamp screw connection suitable for our sensors

Our TE 280 thermocouple is the solution for your cost-effective measuring point. The sensor detects temperature changes in the shortest possible time.

Our UMU 500 universal transducer offers the perfect solution for your measurement tasks. Thanks to its universal input, you can use this device in a wide range of applications.
With the optional sensor supply, you can supply the corresponding measuring devices directly via the 4-20mA loop.
You can configure the UMU 500 on site via the built-in display or conveniently on your PC (via USB interface) using our free software.

Our UMU 500 universal transducer offers the perfect solution for your measurement tasks. Thanks to its universal input, you can use this device in a wide range of applications.
With the optional sensor supply, you can supply the corresponding measuring devices directly via the 4-20mA loop.
You can configure the UMU 500 on site via the built-in display or conveniently on your PC (via USB interface) using our free software.

Our WTR 110 series consists of temperature sensors in which a measuring insert is installed in a 
protective fitting. This has the advantage that the measuring insert can be replaced at any time 
without having to remove the entire device. The protective fitting keeps the process closed, 
so the process does not have to be interrupted during sensor replacement.